ReadMe for

MIMEsweeper Scenario for Command Interceptor

for CS MAILsweeper for SMTP 4.3 Service Pack 2


You can integrate third-party antivirus tools with CS MAILsweeperTM for SMTP. This document provides information on the MIMEsweeper Scenario for Command Interceptor, which integrates CS MAILsweeper for SMTP with COMMAND InterceptorTM for MAILsweeper.

To integrate CS MAILsweeper for SMTP 4.3 with this antivirus tool, you require:


Contents

In this Release Document

This document contains the following topics:

Other Release Documents

Details of other aspects of this release of CS MAILsweeper for SMTP 4.3 are provided in the following release documents:


Contact Information We are constantly reviewing our products. You can obtain product service packs, information about our other products, and details for contacting us on our website http://www.mimesweeper.com/.

About the MIMEsweeper Scenario for Command Interceptor

The MIMEsweeper Scenario for Command Interceptor, supplied by Clearswift Limited, integrates CS MAILsweeper for SMTP 4.3 with the COMMAND Interceptor for MAILsweeper antivirus software, supplied by Authentium, Inc.

To use the MIMEsweeper Scenario for Command Interceptor, you must:

  1. Install the MIMEsweeper Scenario for Command Interceptor on your PC.
  2. Install the COMMAND Interceptor for MAILsweeper third-party antivirus software on your PC.
  3. Create a MIMEsweeper Scenario for Command Interceptor in CS MAILsweeper for SMTP.

You can uninstall a MIMEsweeper Scenario for Command Interceptor if required.

Back to Contents

Installing the MIMEsweeper Scenario for Command Interceptor

You can install the MIMEsweeper scenario for Command Interceptor either during or after installing CS MAILsweeper for SMTP. For more information about installing the scenario during CS MAILsweeper for SMTP installation, see the CS MAILsweeper for SMTP Reference Revision 2.2a.

To install the MIMEsweeper Scenario for Command Interceptor after CS MAILsweeper for SMTP has been installed:

  1. Close the MAILsweeper for SMTP Console.
  2. In Windows Control Panel, double-click Add/Remove Programs.
  3. Select MAILsweeper for SMTP, then Change.
  4. On the Welcome to the InstallShield Wizard for MAILsweeper for SMTP page, click Next.
  5. On the Program Maintenance page, select Modify then click Next.
  6. On the Custom Setup page, expand MAILsweeper for SMTP, then Anti-Virus Scenarios.

    A red cross on the icon for an Anti-Virus scenario indicates that the scenario is not currently installed on the local hard drive.

  7. Click the Command Interceptor icon and select one of the options from the drop-down menu:

    If you select one of the options to install this feature, the MIMEsweeper Scenario for Command Interceptor will be installed on the local hard drive.

    If you select This feature will not be available, a red cross is displayed on the icon for Command Interceptor, and the scenario will not be installed.

  8. Click Next.
  9. On the Ready to Modify the Program page, click Install.
  10. On the Installshield Wizard Completed page, click Finish.

When you next restart the MAILsweeper for SMTP Console, Command Interceptor is displayed in the list of available scenarios.


Back to Contents

Installing the COMMAND Interceptor for MAILsweeper third-party antivirus software

To install the COMMAND Interceptor for MAILsweeper:

  1. Obtain the COMMAND Interceptor for MAILsweeper third-party antivirus software.
  2. Follow the supplier's installation and licensing instructions.

Back to Contents

Creating a MIMEsweeper Scenario for Command Interceptor in CS MAILsweeper for SMTP

To create a new MIMEsweeper Scenario for Command Interceptor in CS MAILsweeper for SMTP:

  1. In the MAILsweeper for SMTP Policy snap-in, expand the Policies folder and then the scenario folder in which you want to create the MIMEsweeper Scenario for Command Interceptor.

    As with all CS MAILsweeper for SMTP scenarios, you can position it anywhere in the scenario folder hierarchy. If you want to scan both incoming and outgoing messages for potential threats, create the scenario in the root Scenarios folder.

  2. On the Action menu, point to New, then click Command Interceptor. The New Command Interceptor Wizard starts.
  3. Complete the wizard pages.

    Each wizard page describes the information it requires. If you need more information on any configuration options in a wizard page, click the Help button.

  4. In the MAILsweeper for SMTP Management snap-in, select the Services folder then stop and restart the Security service.

Back to Contents

Uninstalling the MIMEsweeper Scenario for Command Interceptor

You can remove any instances of the MIMEsweeper Scenario for Command Interceptor in CS MAILsweeper for SMTP. You can save any existing instances before removing them if required.

To remove a MIMEsweeper scenario for Command Interceptor in CS MAILsweeper for SMTP:

  1. Close the MAILsweeper for SMTP Console.
  2. In Windows Control Panel, double-click Add/Remove Programs.
  3. Select MAILsweeper for SMTP, then Change.
  4. On the Welcome to the InstallShield Wizard for MAILsweeper for SMTP page, click Next.
  5. On the Program Maintenance page, select Modify, then click Next.
  6. On the Custom Setup page, expand MAILsweeper for SMTP, then Anti-Virus Scenarios.
  7. Click the Command Interceptor icon and from the drop-down menu select This feature will not be available.

    A red cross is displayed on the icon for Command Interceptor.

  8. Click Next.
  9. On the Ready to Modify the Program page, leave Yes, please backup my current configuration into <location> selected if you wish to save the configured MIMEsweeper scenarios for Command Interceptor before removing them, or clear the option if you do not.
  10. Click Install.
  11. On the Installshield Wizard Completed page, click Finish.

Back to Contents

Revision 2.4
Published by Clearswift Ltd. November 2003
© 2003 Clearswift Ltd
All rights reserved
The materials contained herein are the sole property of Clearswift Ltd. No part of this publication may be reproduced or disseminated or transmitted in any form or by any means electronic, mechanical, photocopying, recording, or otherwise stored in any retrievable system or otherwise used in any manner whatsoever without the express permission of Clearswift Ltd.
Information in this document contains references to fictional persons, companies, products and events for illustrative purposes. Any similarities to real persons, companies, products and events is coincidental and Clearswift shall not be liable for any loss suffered as a result of such similarity.
The Clearswift Logo and Clearswift product names including ESTM, ENTERPRISEsuiteTM, ES ClearPointTM, ES ClearSecureTM, ES ClearEdgeTM, ES ClearBaseTM, ES ClearSurfTM, CS DeepSecureTM, CS Bastion IITM, CS X.400 FilterTM, CS FlashPointTM, CS ClearDetectTM, CS ClearSupportTM, CS ClearLearningTM, CS MIMEsweeperTM, CS REMOTEmanagerTM, CS MAILsweeperTM, CS MIMEsweeper for WebTM, CS e-SweeperTM, CS IMAGEmanagerTM, CS SECRETsweeperTM are trademarks of Clearswift Ltd.
All other trademarks are the property of their respective owners. Clearswift Ltd. (registered number 3367495) is registered in Britain with registered offices at 1310 Waterside, Arlington Business Park, Theale, Reading, Berkshire RG7 4SA, England. Users should ensure that they comply with all national legislation regarding the export, import, and use of cryptography.